A Proudly Canadian Company
Welcome, Login
With Your Vision & Our Products,
Anything's Possible
With Your Vision & Our Products,
Anything's Possible

1" Black 3M™ Adhesive Back Velcro® - Loop

Part Number:VEL-6003
1" Black 3M™ Adhesive Back Velcro® - Loop
1' Black 3M™ Adhesive Back Velcro® - Loop
Your Price: $3.10 Per Foot
Quantity Pricing
  • 75 - 149
  • $2.79
  • 150 - 299
  • $2.64
  • 300+
  • $2.48

1" Black 3M™ Adhesive Back Velcro® - Loop is the ultimate adhesive/sticky back hook & loop tape on the market. 3M™ is known for their adhesives and they have applied their technology to this tape. If you are looking for holding power, this 3M™ Adhesive Back Velcro® is second to none, period.

Adhesive: Acrylic pressure sensitive adhesive.

Application: Adhesive backed products should be applied to above 68 F (20 C) to surfaces that are smooth, dry and free of oils or mold release agents. It is recommended to wipe the substrate with an isopropanol/water solution (50/50 or with heptane or methyl ethyl ketone) and allow to dry. With firm roller pressure, apply 3M™ tape allowing an appropriate dwell time at room temperature before loading or disengaging. Do not touch adhesive after liner is removed. To increase resistance to edge lifting, round the corners or recess products to substrate.

Cold Crack: Equal to or greater than -28 degrees Celsius.

Content: 100% Nylon.

Description:  3M™ Premium 1" Pressure Sensitive Hook . The woven hook is covered with tiny, stiff hooks, about 300 hooks per square inch.

Dwell Time: Minimum Dwell time: 48 hours. Full strength reached after 72 hours.

Features: Preshrunk to insure maximum dimensional stability and flatness. Coated on the backside with a high temperature acrylic pressure sensitive adhesive designed to function over a range of temperatures and humidity. This adhesive is especially suited for attachment to bare metals and a variety of substrates. Tested and recommended on base metals, painted metals, polystyrene, acrylic, polycarbonate, rigid vinyl and glass.

Flammability: Meets the requirements of F.A.R. 25.283 (b-3) and FMVSS-302 as is unattached and F.A.R. 25.283 par (b), (b-2), (b-3), and FMVSS-302 when attached to a thin metal panel.

Peel Cleavage: Peel Strength: "t-Peel": 1.3 lbs./inch width (223.1 g/cm width). "90 degree Peel" Flexible to Rigid 1.8 lbs./inch(313.2 g/cm width).

Shear Strength: Dynamic Shear Test: 4.8 lbs./sq.in. (33N/sq.m.)

Thickness: 2.4mm

Uses: Used in Automotive, air craft, electronic and business equipment applications. Useful for anti-scratch surface, automotive interiors, medical braces, truck tonneau covers, attaching accessories and equipment, vibration and sound dampening equipment, watercraft and marine applications.

Water Resistance: Closure strength of nylon hook and loop fasteners decreases after prolonged exposure to water mainly due to absorption by the cut ends of hook products. Closure strength is regained when dried. The adhesive has been formulated to withstand typical outdoor temperature, humidity and ultraviolet exposure conditions.

Put Up: 150'

Sold per foot.


Related Items


Recently Viewed Items

Information Links
Browse By Category