Top Gun Marine Fabric Hemp Beige is the ultimate marine cover fabric! It is a 100% woven polyester fabric with an acrylic coating. Top Gun is a rugged fabric known for its superior strength, excellent abrasion resistance, dimensional stability, and an exceptionally high degree of water repellency. It is also ultra-violet and mildew resistant.
Uses: Boat tops, mooring covers, travel covers, and any other exterior marine application where protection from the elements is paramount.
Abrasion: Exceeds 16,000 Double Rubs.
Cautions: To maintain a sharp appearance all that is required is to periodically clean with a mild soap and soft brush followed by a thorough rinse. Top Gun fabrics may be cleaned with a cleaning solution of 4oz of Clorox and 2oz of Ivory Snow in one gallon of warm (100F) water. DO NOT use detergents. Use a soft bristled brush to lift soil embedded in the fabric surface. Rinse thoroughly with clear water to remove soil and soap residue. After thorough cleaning, water repellency may be reduced. An application of Aqua-Tite silicon water repellent is recommended after the fabric has dried thoroughly. Use of other refinishing agents is not recommended. Colour pigments are in the acrylic resin so color can come off with application of some solvents. When total protection against color rub-off is required a protective patch should be sewn in at contact points (especially contact with vinyl).
Cold Crack: Product Cold Crack is equal to or greater than -20 degrees Celsius.
Construction: 0600 Denier Content: 100% Polyester
Description: Marine Topping and Cover Canvas, Acrylic Impregnated 100% Polyester.
Features: Transference Scale): Wet 4, Dry 4 Spray Rating (AATCC 22-1974): 90 Hydro-static Pressure 3 Drops (FED-STD-191,5514): Initial 83.8 centimeters. Hydro-static Performance 8" for 10 minutes (FED-STD-191,5516): Initial 0.0 milliliters, after weathering 7.0 milliliters. Acrylic impregnation coating is DuPont Zepel with Stain and Water Repellentcy. TOP GUN is considered a 600 Denier x 600 Denier fabric. Technically it is made up of 4 plies of 150 Denier twisted together to make each 600 Denier yarn. Breathability: ASTM E96, Method B: 116g/sqm. Marchem fabrics are tested for 500 hours in a Carbon-Arc Weather Meter without filters. This is the harshest weathering equipment available and simulates a southern Florida climate. 500 hours in a Carbon-Arc without filters is more severe than 1,000 hours in either QUV or Xenon.
Mildew: Mildew Protective Finish.
Tear Strength: Passes ASTM D2261 - Warp = 43 lbs. and Fill = 30 lbs.
Tensile Strength: Passes ASTM D1682 - Warp = 500 lbs. and Fill = 388 lbs.
Ultraviolet: Rated Ultraviolet Resistant equal to or greater than 1500 hours.
Warranty: Five-year limited warranty.
Put Up: 50 Yards.
Weight: 11.00 ounces per square yard.18.94 Ounces per Lineal Yard.
Sold per running yard.