View Save Carts

×

Save Cart

Product SKU Quantity Total

Send us a message!

Welcome to the new JT's Outdoor Fabrics!

Spring Cleaning & Prep for Marine Vinyl After Winter Storage

Spring Cleaning & Prep for Marine Vinyl After Winter Storage

From Storage to Shine & - Marine Vinyl Spring Prep Made Easy!

As boating season approaches in Canada, it's essential to inspect, clean, and protect marine vinyl after months in storage. A proper spring cleaning routine ensures your boat's upholstery remains in top condition for summer adventures. Here’s the ideal spring cleaning and protection routine to get your boat seats and vinyl surfaces looking their best.

Step 1: Inspect for Damage (Before Cleaning)

  1. Look for mold, mildew, or discoloration that may have developed during storage.
  2. Check for cracks or brittleness in the vinyl, especially if it wasn’t conditioned before winter.
  3. Inspect seams and stitching for signs of wear or looseness.

If you notice significant damage, it may be time for repairs or reconditioning.

Step 2: Deep Cleaning to Remove Winter Buildup

After months in storage, vinyl surfaces may have collected dust, mildew, or staining. A thorough deep clean will refresh the material.

Recommended Products:

Pro Tip: If mildew has developed, treat affected areas with Iosso Mold & Mildew Stain Remover before proceeding with general cleaning.

IMAR #603 Stamoid Marine Vinyl Cleaner: Cleaning Steps

  1. Pre-rinse vinyl using clean water.
  2. Apply IMAR Stamoid Marine Vinyl Cleaner #603.
  3. Gently brush using a soft bristle brush. Let the solution do the work—avoid excessive scrubbing.
  4. Rinse thoroughly with clean water to remove all cleaner.
  5. Repeat if needed.

Pro Tip: After the fabric is dry, consider applying IMAR #601 Stamoid Marine Vinyl Protective Cream or IMAR #602 Stamoid Marine Vinyl Protective Spray for added protection.

Step 3: Protect Your View — How to Clean Strataglass

If your boat has clear vinyl enclosures or windows made from Strataglass, they’ll need special care after winter storage to prevent clouding, cracking, or brittleness.

Recommended Product:

Cleaning Steps:

  1. Rinse the surface with clean water to remove loose dirt or salt.
  2. Spray IMAR™ Strataglass Cleaner directly onto the clear vinyl.
  3. Gently wipe using a soft, clean microfiber cloth.
  4. Buff lightly to restore clarity and remove any residue.

Pro Tip: Always use microfiber—never paper towels or abrasives. For extra protection, follow up with IMAR™ Strataglass Protective Polish.

Why It Matters

IMAR™ Strataglass Protective Cleaner contains UV inhibitors that help prevent brittleness, maintain flexibility, and preserve clarity. Safe for daily use, it’s ideal for routine cleaning to extend the life of your Strataglass.

Step 4: Restore & Condition Vinyl for Summer

Once your marine vinyl is clean and fully dry, restore its suppleness and protect it from UV damage, heat, and moisture. Choose ONE of the products below.

Recommended Products:

IMPORTANT: Do not use 303® Protectant with IMAR #601 or #602. Choose only one protectant to avoid buildup or reduced effectiveness.

Option A: IMAR #601 Stamoid Marine Vinyl Protective Cream — Long-Lasting Protection

Before you start: Ensure the vinyl is clean and completely dry (use IMAR #603 or 303 Multi-Surface Cleaner).

  1. Apply by hand using a clean cloth (similar to waxing a car).
  2. Use sparingly—little goes a long way.
  3. Buff with a clean cloth for a smooth, even finish.

Pro Tip: Apply in small, circular motions and let it sit for a couple of minutes before buffing to maximize absorption and protection.

Option B: IMAR #602 Stamoid Marine Vinyl Protective Spray — Quick Maintenance

Before you start: Make sure the vinyl is clean and completely dry.

  1. Shake IMAR #602 well.
  2. Spray a light mist directly onto clean, dry vinyl.
  3. Immediately wipe and buff with a clean microfiber cloth.
  4. Work in sections for best results.

Pro Tip: Don’t let it sit—this is not a leave-on spray.

Option C: 303® Aerospace Protectant — UV Defense Hero

Before you start: Clean and dry the vinyl thoroughly.

  1. Shake well before use.
  2. Spray onto a clean microfiber cloth (not directly on the vinyl).
  3. Wipe evenly across the vinyl surface.
  4. Immediately buff with a second clean, dry cloth to avoid haze or slickness.
  5. Reapply every 3–5 weeks or as needed.

Pro Tip: For best results, apply 303® in the shade or on a cool surface to prevent streaking or fast drying.

Step 5: Preventative Care for the Boating Season

  • Keep vinyl dry after use to prevent mildew.
  • Use seat covers when not in use to protect against fading and stains.
  • Clean lightly every 1–2 weeks to prevent dirt buildup.

Ongoing Maintenance Schedule

  • Light Cleaning: Weekly or biweekly
  • Deep Cleaning: Monthly or as needed
  • Protection (IMAR #602 or 303 Aerospace Protectant): Every 4–6 weeks
  • Conditioning (IMAR #601 Protective Cream): Every 3–6 months

Quick Tips for Success

  • Follow the instructions: Carefully read product labels—proper usage may vary. We are not responsible for misuse or improper application.
  • Wear protective gear: Use gloves and eye protection when handling products.
  • Test before use: Always test on a small, inconspicuous area first.
  • Avoid harsh cleaners: Bleach and ammonia can dry out and damage marine vinyl.
  • UV protection is key: Regular protectant extends upholstery life.
  • Dry completely: Don’t trap moisture under protectants or covers.
  • Less is more: Thin, even layers beat heavy applications.

Common Mistakes to Avoid

  • Mixing protectants—stick to one system (IMAR or 303) at a time.
  • Using abrasive brushes or tools that can scratch vinyl or weaken stitching.
  • Using pressure washers—these can damage seams and force water into foam.
  • Letting protectants dry on the surface—buff them in right away.
  • Covering wet seats or vinyl—trapped moisture leads to mildew growth.

Please note: The information shared in this blog is meant to be general guidance. While we do our best to ensure everything is accurate and helpful, we can’t guarantee its suitability for every situation. Always follow manufacturer instructions and test products in a small, inconspicuous area first. Use at your own discretion.