White Water Vinyl Hidem Gimp - Mid Gray is colour matched with our White Water Line of marine vinyl fabric and piping welt. The Hydem Gimp has all the marine vinyl characteristics such as -28 degree Celsius cold crack, mildew and rot resistance, 1500 hour UV rating and fire retardant ratings.
Vinyl Hydem Trim is most commonly used on boat upholstery projects to hide staples on seat edges or splice lines where vinyl meets vinyl. Lay the Hydem Gimp over the edge or seam that requires finishing. Separate the two flaps on top of the Gimp and staple through the Hydem and the raw edge. Your staples are concealed, giving problem areas a sleek, new finished look.
Abrasion: Exceeds 30,000 Double Rubs.
Backing Content: 100% Polyester.
Backing Weight: 3.17 ounces per square yard.
Cold Crack: Equal to or greater than -28 degrees Celsius.
Fire Retardancy: California Bulletin 117-Section E, NFPA 260 Class 1. UFAC Class 1.
Mildew: Product is Mildew Resistant.
Tear Strength: Passes ASTM D2261 - Warp = 10 lbs and Fill = 15 lbs.
Tensile Strength: Passes ASTM D751 - Warp = 105 lbs and Fill = 89 lbs.
Ultraviolet: Equal to or greater than 1500 hours.
Put-Up: 150' per roll.
Vinyl Weight: 28.00 Ounces per Linear Yard.
Width: 3/4".
Sold per foot.
[ITEMPRICE]
